|
Post by Dwight,B,27z on Sept 17, 2010 22:56:55 GMT -5
lumpy. im still kinda new to this dirt racing "lingo". head's up racing mean's, the better you place on sat the better you start in the "A" main on sun? and will everyone be able to run in the big show?
thank's fore the help. 27z
|
|
|
Post by lumpy4080 on Sept 18, 2010 8:14:40 GMT -5
Yes, the better you do each race moves you closer to the front. depending on car count and how you do in the qualifier, will determine where you start in B-main or if you go directly to the A-main. If there are lots of cars there is a possibility that the B-main could be your last race. Heck if there's tons of cars (hope hope) there could be a C-main.
|
|
|
Post by will26 on Sept 18, 2010 10:09:07 GMT -5
Better knock down the fence to the gun club if theres enough cars for a ''c'' main lol it would be pretty crowded. Lets hope we have to tear the fence down lol.
|
|
|
Post by white27 on Sept 19, 2010 14:13:19 GMT -5
I have question about the dtc fleyer for the hobbys it says 2 or 4 barrel carbs with restrictor plates does it mean any unaltered 2 or 4 barrel with the secondary wired shut.
|
|
|
Post by Retta on Sept 19, 2010 17:35:54 GMT -5
It is the quadrojet with the secondaries wired off or the 4412 with restrictor plate
|
|
|
Post by white27 on Sept 22, 2010 19:03:08 GMT -5
I just want the rules to be clear for hobbys at the dtc. Is this a open comp race other than the out lined rules on the flyer or are we running rsr rules? The only reason I ask is because all the other classes it says rsr rules
|
|
|
Post by Retta on Sept 22, 2010 19:49:42 GMT -5
Yes it is RSR Rules for the Hobbys
|
|
|
Post by hogracer3d on Sept 26, 2010 14:48:14 GMT -5
what is the tire rule for pro stock for DTC?
|
|
|
Post by Retta on Sept 26, 2010 19:45:58 GMT -5
Pro Stock tire must be no wider than 10.5"
|
|
|
Post by hogracer3d on Sept 26, 2010 22:05:58 GMT -5
Pro Stock tire must be no wider than 10.5" OK, thanks, one more question and I'll quit bugging... The regular RSR pro stock rules say OEM transmission, but the DTC flyer does not say that. Is a OEM tranny required for the DTC? or is a Falcon OK?
|
|
|
Post by Retta on Sept 27, 2010 8:36:42 GMT -5
I will get a clarification at the meeting tonigt and get back to you.
|
|
|
Post by Retta on Sept 28, 2010 8:35:01 GMT -5
I talked to the President and Board they said that a Falcon will be ok
|
|
|
Post by hogracer3d on Sept 28, 2010 16:32:34 GMT -5
I talked to the President and Board they said that a Falcon will be ok Good enough, thanks
|
|
|
Post by spec21 on Sept 29, 2010 20:37:41 GMT -5
Falcon WHAT? I read the rules, does not allow that. Slow down guys, really opening a can of worms there.
|
|
|
Post by hogracer3d on Sept 30, 2010 0:36:02 GMT -5
PRO STOCKS $1,500 to win OEM cast iron block & heads RSR spec heads ok Weight jacks ok No wedged bodies Carburetors not to exceed 800 cfm 3000 lbs. minimum including driver 20 Car Minimum
|
|